The height of the cutting rule for most of the dies is between 0.918 to 0.937 inches. Any other standard height can be done with a short notice.
Almost, there is no limitation in the die board size. A very big die (bigger than 54”) can be made in two pieces and we attach them together during the procedure.
The thickness of the cutting rule needs to be between 1.5 Pt to 3 Pt and creasing rule between 1 to 4 Pt.
We manufacture only flat bed dies.
Stripping boards including Female, Male and Front Waste will be made considering each press specification.
For those who use the Counter plate instead of Matrix we are capable to manufacture them.
When you need to get your product approved by your client even before making a die, this will be your solution. A CAD Cut Sample will be exactly the same as the end product. CAD Cut Sample either could be done using your design or we design it from scratch. You just tell us what you need, and we create the dieline and the sample for you.
If there is a small quantity of products and the budget doesn’t allow making a die and diecut it, we can help you making it by sample maker without using a die.